Home Flipping Houses 6 Handyman Skills Every Homeowner Should Master

6 Handyman Skills Every Homeowner Should Master

by admin
0 comment

As a rehab, there are some jobs that are worth knowing how to do. Relying on a handyman to solve all the small problems is expensive and time consuming. Why wait for your dependable person to open for a small repair?

Or maybe the job is too small to hire and you can’t find someone to do it. Most contractors don’t want to take on small jobs. Not worth their time. Or maybe you’ve run out of money because of an unexpected problem. There are several reasons why simple repairs suddenly (and surprisingly) become less simple or simply very expensive.That’s when it’s very convenient Get used to Very convenient.

And don’t worry: just because you’ve never had a hammer before doesn’t mean you can’t complete these skills. Basic home maintenance is surprisingly easy, but at first glance it may seem complicated, complicated, or simply too difficult. You don’t even have to be muscular. Anyone can learn 101 level plumbing. Anyone can make a hole in the wall. You might even enjoy teaching your kids some basic how-tos — you might find that they enjoy painting walls and helping them tile. .. (However, it may skip electricity until it is old.)

In any case, here are six jobs worth knowing how to do.

Related: Investors: Don’t Ignore Postponed Maintenance — Silent Cash Flow Killer

6 handyman skills that everyone should learn

Whether you’re flipping or renting a property or wanting to improve your DIY skills in your home, mastering the work of these handymen will make everything go smoothly.

1. Painting

Everyone should be able to paint. You need less supplies and even less skill. Paint roller, paint pan, paint. If you’re at the short end of the yardstick, it’s probably an extension handle. Depending on your mood, you can paint most of the wall first and then get the edges or reverse the order. Personally, I like to get the edges and corners first.

Choose not to use tape to block the edges. I watched a video on YouTube and learned how to “cut in”. ((((This one It is my favorite. Many times, I taped off the ceiling and edges, but when I peeled off the tape, the paint only popped up. It’s really frustrating to repaint those edges, and it’s almost unattractive. The best way to learn how to cut is to first look at the tutorial and then practice in the corners. You just have to paint. When you get it, the picture goes really fast.

Invest in high quality angled brushes? About 2-1 / 2? width. It’s smaller than that and you have to go to the paint bucket many times. Beyond that, you begin to lose control.

When the edges are finished, remove the rollers and start rolling. Use slow but stable movement when rolling on textured walls. As you progress slowly, the paint will settle deeper into the texture, reducing the number of coats you need to apply. A 10×10 room can be completed in just a few hours.

Professional tips: Buy high quality paint. I bought the cheapest paint I found when painting my first home, and I ended up needing 5 coats to cover the colors below. The cheap one costs $ 15 a gallon, but it required five times as much paint as a high-quality $ 30 to $ 50 per gallon. Buy the wrong color “Oops” paint You can save a lot of money.

2. Basic electricity

Your new home is likely to have ugly lighting fixtures. Replacing them isn’t much harder than replacing the bulbs, and you certainly don’t need a contractor’s license to do so. Learn how to make these small changes yourself, rather than hiring an expensive electrician for a simple job. We do not recommend a complete rewiring operation on the first attempt, but you can safely update the lights or even install a ceiling fan.

The library is full of books that explain how electricity works and outline how-tos of strange electrical work. YouTube is another great source of information. It’s better than a book, so you’ll find step-by-step video tutorials that you can watch over and over again.

I’m sure the electrician at the site will say it’s not a mess. They certainly have a story about homeowners who did their own electricity and burned down their homes. And I’m sure it happened. Therefore, if you are new to this type of work, ask an experienced person to help you.

Related: How to Remodel Your Home — Whether you’re renting, turning over, or moving

3. Basic plumbing

The plumber Many Of money. When the dinosaurs roamed the earth, the plumbing was done with copper pipes, which had to be soldered together. This is definitely a skill I don’t recommend learning at work. One mistake and the whole house is flooded.

But there is a new sheriff in the plumbing department, he goes by the following name Shark bite.. I don’t know what engineering magic is in the Sharkbite fittings, but the repair of copper pipes has become much faster. You literally take the pipe and push it into the fitting. Put the water back in and make sure there are no leaks. It’s ridiculous how easy it is. Of course, you’ll pay for convenience-but still not enough to hire a plumber.

Even better, the supply line can be piped with PEX (in most cities). This is much easier and cheaper than copper. PEX is an abbreviation for cross-linked polyethylene. In fact, if your state permits the use of PEX, it means Preposterously Easy X… business (nothing starts with X). If I needed more instructions, I used the books in the library to re-plumb the whole house and watch the YouTube video.

Sinks leak quite often, not necessarily because the tenant has failed. Knowing how to handle flowing faucets, funky sprinkler systems, or other basic plumbing maintenance tasks can save you time and money.

4. Tiling

The skill that has easily benefited us most is tiling — and it’s incredibly easy. Place the mortar down and the tiles up. There are subtle differences in this process. Before entering the floor, it’s highly recommended to watch some YouTube videos to see how it works.

Many Home Depots and Loews both offer free tiling classes about once a month. They let you learn with their supplies and show you the right skills. There is no limit to the number of times you can take a class.

My advice: Take the time to use the level. Mix a small batch of mortar first and don’t be afraid to throw away some if you can’t use it in time.

In addition, it’s a good idea to buy a tile saw and learn how to use it. I paid $ 70 for the first saw about 10 years ago. Nothing needs to be done except to replace the blade once. Used for tiles over 1,900 square feet, including ceramics, glass, slate and travertine.

5. Drywall repair

Hanging drywall from the beginning is an advanced level DIY skill, but the bad result is very Obvious — Every real estate investor needs to know how to do basic drywall repairs. There is no reason to pay the contractor to repair a hole in the drywall left by an angry tenant (or a violent kid, or an attempt to hang a TV failed). Applying patches to drywall is easy. And, as always, YouTube will guide you in the right direction.

Keep the repair agent in stock for minor repairs. If you know how to quickly patch nail holes, you don’t have to panic about tenants hanging artwork against your wishes. Big holes are a bit more work, but they’re not something that a handy DIY person can’t manage. You may need to cut out drywall and land on studs in a small area. (This is great Home Depot Tutorial.. ) With saws, drywall tape, and the most useful remediation agent you’ve ever done, you’re working.

Related: Here’s how to increase the value of your home or investment property

6. Simple carpenter

No one expects to create a built-in shelf for an order. However, understanding the basics of woodworking can be of great help when repairing or renewing moldings, trying to install DIY flooring or doors, or patching rotten boards on the property’s patio. Consider choosing some basic tools, such as a miter saw or a basic cross-cut sew.

In addition, there are bonuses to completing basic woodworking. Woodworking is a fun hobby with many uses. If you find these simple repairs fun, continue practicing. Soon, that built-in bookshelf may not be a problem at all. You might even enjoy making furniture or even building a full deck.

Starting a career as a real estate investor certainly does not require handyman training. However, completing these six simple trading skills can save you a lot of money with a one-time contractor fee. Is the stove behaving strangely? Is the chandelier in the dining room flickering? Electrical training can help identify the cause and make simple minor repairs.

You may also like